Back to overview

Documenting parts

At AISLER you can easily document your parts. This can go in two ways:

Not only will we be able to provide you with a great quote for providing parts, but also you will get all available datasheets directly along with it. That means the moment you have documented your part, you'll have one place to look for all datasheets.

Using Magic Match

Magic Match is our simple tool to easily specify SMD Capacitors and Resistors, if you do not need a very specific component. For that just navigate to your project's Parts tab and click Match on any component. Then enter your specification e.g. 10µF 10V for a 10µF capacitor with a 10V voltage rating. We will than automagically match a part that fits these requirements. Note that we default to a 0603 SMD package. If you require a different package just add it as an additional parameter, e.g. 10µF 10V 0805 for a capacitor with a 0805 SMD package.

AISLER - Specifying Parts using Magic Match

Parameters for Resistors

Parameter Example
Resistance 10k
Tolerance 1%
Power 0.1W
Package 0402

In practice, you could hence specify:

Please note: The less parameters you specify, the easier it will be for us to provide you with a suitable resistor.

Parameters for Capacitors

Parameter Example
Capacitance 22uF
Dielectric X7R
Voltage rating 16V
Package 1206

In practice, you could hence specify:

Please note: The less parameters you specify, the easier it will be for us to provide you with a suitable resistor.

Specifying by MPN

If you want to document parts other than Capacitors or Resistors (ICs, Diodes, LEDs, etc) or you cannot find a suitable Magic Match then you can also specify the direct part. This goes is multiple ways:

AISLER - Specifying Parts using MPN, SKU or AISLER part ids